3Com VCX v7111 User Manual page 341

11 In the field Require Secured Web Connection (HTTPS), select HTTPS only.
It is important you use HTTPS (secure Web server) when connecting to the gateway
over an open network, since the password is transmitted in clear text. Similarly, for
Telnet, use SSL TelnetServerEnable = 2 (see
12 Save the changes and reset the gateway (see
After reset, when accessing the Web or Telnet servers, use the username and password you
configured in the RADIUS database. The local system password is still active and can be
used when the RADIUS server is down.
To configure RADIUS support on the gateway using the ini file:
Add the following parameters to the ini file. For information on modifying the ini file, see
Modifying an ini File.
EnableRADIUS = 1
WebRADIUSLogin = 1
RADIUSAuthServerIP = IP address of RADIUS server
RADIUSAuthPort = port number of RADIUS server, usually 1812
SharedSecret = your shared secret'
HTTPSOnly = 1
BehaviorUponRadiusTimeout = 1
RadiusLocalCacheMode = 1
RadiusLocalCacheTimeout = 300
RadiusVSAVendorID = your vendors ID
RadiusVSAAccessAttribute = code that indicates the access level attribute
DefaultAccessLevel = default access level (0 to 200)
®
3Com VCX V7111 VoIP Gateway User Guide
Secured Telnet).
Resetting the V7111 Gateway).
341