3Com VCX v7111 User Manual page 310

Replacing the Main Corporate Logo with an Image File
Use a gif, jpg or jpeg file for the logo image. It is important that the image file has a
fixed height of 59 pixels (the width can be configured up to a maximum of 339
pixels). The size of the image files (logo and background) is limited each to 64
kbytes.
To replace the default logo with your own corporate image using the Web Interface:
Access the V7111 Embedded Web Server (see
1
In the URL field, append the suffix AdminPage (note that its case-sensitive) to the IP
2
address, for example, http://10.1.229.17/AdminPage.
Click Image Load to Device; the Image Download screen is displayed.
3
Figure 116 Image Download Screen
Click the Browse button in the Send Logo Image File from your computer to the device
4
box. Navigate to the folder that contains the logo image file you want to load.
Click the Send File button; the file is sent to the device. When loading is complete, the
5
screen is automatically refreshed and the new logo image is displayed.
Note the appearance of the logo. If you want to modify the width of the logo (the default
6
width is 339 pixels), in the Logo Width field, enter the new width (in pixels) and click the
Set Logo Width button.
To save the image to flash memory so it is available after a power fail, see
7
Configuration.
The new logo appears on all Web Interface screens.
310
Accessing the Embedded Web
®
3Com VCX V7111 VoIP Gateway User Guide
Server).
Saving