3Com VCX v7111 User Manual page 224

Click Next; the Load an ini File screen opens; see
other auxiliary file listed in the Wizard is optional.
Note that as you progress, the file type list on the left indicates which file type loading is in
process by illuminating green (until FINISH).
Load an ini File Screen
Figure 87
In the Load an ini File screen, you can now choose to either:
7
Click Browse and navigate to the ini file; the check box Use existing configuration, by
default checked, becomes unchecked. Click Send File; the ini file is loaded to the V7111
gateway and you are notified as to a successful loading.
Ignore the Browse button (its field remains undefined and the check box Use existing
configuration remains checked by default).
Ignore the Browse button and uncheck the Use existing configuration check box; no ini
file is loaded, the V7111 uses its factory-preconfigured values.
You can now choose to either:
8
Click Cancel; the V7111 resets utilizing the cmp, ini and all other configuration files that
were previously stored in flash memory. Note that these are NOT the files you loaded in
the previous Wizard steps.
Click Reset; the V7111 resets, utilizing the new cmp and ini file you loaded up to now as
well as utilizing the other configuration files.
Click Back; the Load a cmp file screen is reverted to; see
Click Next; the Load a CPT File screen opens, see
any other auxiliary file listed in the Wizard is optional.
224
Figure 87. Loading a new ini file or any
Figure 85.
Figure 88: Loading a new CPT file or
®
3Com VCX V7111 VoIP Gateway User Guide