Activating The Internal Syslog Viewer - 3Com VCX v7111 User Manual

Voip
Hide thumbs Also See for VCX v7111:
Table of Contents

Advertisement

Counter
Description
Attempted Fax Calls
This counter indicates the number of attempted fax calls.
Counter
Successful Fax Calls
This counter indicates the number of successful fax calls.
Counter
Call Routing Status
The Call Routing Status screen provides you with information on the current routing method
used by the gateway. This information includes the IP address and FQDN (if used) of the
Proxy server the gateway currently operates with.
Call Routing Status Screen
Figure 78
Call Routing Status Parameters
Table 74
Parameter
Current Call-Routing Method
Current Proxy
Current Proxy State

Activating the Internal Syslog Viewer

The Message Log screen displays Syslog debug messages sent by the gateway.
Note that it is not recommended to keep a Message Log session open for a prolonged period
(see the Note below). For prolong debugging use an external Syslog server, see
Gateway Line
Testing.
®
3Com
VCX V7111 VoIP Gateway User Guide
Description
Proxy = Proxy server is used to route calls.
Routing Table preferred to Proxy = The Tel to IP Routing table takes
precedence over a Proxy for routing calls (PreferRouteTable = 1).
Routing Table = The Tel to IP Routing table is used to route calls.
Not Used = Proxy server is not defined.
IP address and FQDN (if exists) of the Proxy server the gateway
currently operates with.
N/A = Proxy server is not defined.
OK = Communication with the Proxy server is in order.
Fail = No response from any of the defined Proxies.
V7111
215

Advertisement

Table of Contents
loading

Table of Contents