Saving Configuration - 3Com VCX v7111 User Manual

Click the LOCK button. If Graceful Option is set to Yes, the lock is delayed and a screen
4
displaying the number of remaining calls and time is displayed. Otherwise, the lock
process begins immediately. The Current Admin State displays the current state:
LOCKED or UNLOCKED.
To unlock the gateway, take these 2 steps:
Access the Maintenance Actions screen as described above in the previous procedure.
1
Click the UNLOCK button. Unlock starts immediately and the gateway is ready for new
2
incoming calls.

Saving Configuration

The Maintenance Actions screen enables users to save the current parameter configuration
and the loaded auxiliary files to the non-volatile memory (that is, flash) so they are available
after a hardware reset (or power fail). Parameters that are only saved to the volatile memory
(RAM) revert to their previous settings after hardware reset.
CAUTION:
•
Saving changes to the non-volatile memory may disrupt traffic on the gateway.
To avoid this, disable all new traffic before saving by performing a graceful lock
(refer to Locking and Unlocking the Gateway
•
In the Web interface, parameters prefixed with an exclamation mark ('!') are
saved to the non-volatile memory only after a device reset.
To save the changes to the non-volatile:
Open the Maintenance Actions screen (Maintenance menu); the Maintenance Actions
1
screen is displayed.
®
3Com VCX V7111 VoIP Gateway User Guide
).
231