3Com VCX v7111 User Manual page 208

ini File Parameter Name
ExtBootPReqEnable
Automatic Updates Parameters
For detailed information on the automatic update mechanism, see
Mechanism.
Automatic Updates Parameters
Table 70
ini File Parameter Name
CmpFileURL
IniFileURL
PrtFileURL
208
Valid Range and Description
0
= Disable (default).
1 = Enable extended information to be sent in BootP request.
If enabled, the device uses the vendor specific information field in the
BootP request to provide device-related initial startup information
such as board type, current IP address, software version, etc. For a
full list of the vendor specific Information fields, see
Information Field.
The BootP/TFTP configuration utility displays this information in the
Client Info column (see
This option is not available on DHCP servers.
Description
Specifies the name of the cmp file and the location of the server (IP address
or FQDN) from which the gateway loads a new cmp file and updates itself.
The cmp file can be loaded using: HTTP, HTTPS, FTP, FTPS or NFS.
For example: http://192.168.0.1/filename
When this parameter is set in the ini file, the gateway always loads
the cmp file after it is reset.
The cmp file is validated before it is burned to flash. The checksum
of the cmp file is also compared to the previously-burnt checksum to
avoid unnecessary resets.
The maximum length of the URL address is 99 characters.
Specifies the name of the ini file and the location of the server (IP address or
FQDN) from which the gateway loads the ini file. The ini file can be loaded
using: HTTP, HTTPS, FTP, FTPS or NFS.
For example:
http://192.168.0.1/filename
http://192.8.77.13/config<MAC>
https://<username>:<password>@<IP address>/<file name>
When using HTTP or HTTPS, the date and time of the ini file are
validated. Only more recently-dated ini files are loaded.
The optional string '<MAC>' is replaced with the gateway's MAC
address. Therefore, the gateway requests an ini file name that
contains its MAC address. This option enables loading different
configurations for specific gateways.
The maximum length of the URL address is 99 characters.
Specifies the name of the Prerecorded Tones file and the location of the
server (IP address or FQDN) from which it is loaded.
https://server_name/file
http://server_name/file,
The maximum length of the URL address is 99 characters.
Figure 145).
Automatic Update
®
3Com VCX V7111 VoIP Gateway User Guide
Vendor Specific
.