Advanced Configuration; Configuring The Network Settings - 3Com V7122 User Manual

Mode
Cyclic Descending
Descending
Dest Number + Cyclic Ascending
By Source Phone Number
The internal numbers of the gateway's B-channels are defined in the 'Trunk Group
Table' under the 'Phone Number' column. For detailed information on the 'Trunk
Group Table', see

Advanced Configuration

Use this menu to set the gateway's advanced configuration parameters (for advanced users
only).

Configuring the Network Settings

From the Network Settings you can:
Configure the IP Settings.
Configure the Application Settings.
Configure the NFS Settings (see
Configure the IP Routing Table (see
Configure the VLAN Settings.
Configuring the NFS Settings
Network File System (NFS) enables the gateway to access a remote server's shared files
and directories and to handle them as if they're located locally. A file system, the NFS is
independent of machine types, OSs, and network architectures. Up to five different NFS file
systems can be configured.
V7122 Gateway User Guide
Description
Select the next available channel in descending cycle order. Always
select the next lower channel number in the Trunk Group. When the
gateway reaches the lowest channel number in the Trunk Group, it
selects the highest channel number in the Trunk Group and then start
descending again.
Select the highest available channel. Always start at the highest
channel number in the Trunk Group and if that channel is not available,
select the next lower channel.
First select the gateway port according to the called number (see the
note below). If the called number isn't found, then select the next
available channel in ascending cyclic order. Note that if the called
number is found, but the port associated with this number is busy, the
call is released.
Select the gateway port according to the calling number.
Configuring the Trunk Group
Configuring the NFS
Configuring the IP Routing
Table).
Settings).
Table).
101