3Com VCX v7111 User Manual page 212

IP Connectivity Parameters
Table 72
Column Name Description
IP Address IP address defined in the destination IP address field in the Tel to IP Routing table.
or
IP address that is resolved from the host name defined in the destination IP address
field in the Tel to IP Routing table.
Host Name Host name (or IP address) defined in the destination IP address field in the Tel to IP
Routing table.
Connectivity Method The method according to which the destination IP address is queried periodically
(currently only by ping).
Connectivity Status Displays the status of the IP address connectivity according to the method in the
Connectivity Method field.
Can be one of the following:
Quality Status Determines the QoS (according to packet loss and delay) of the IP address.
Can be one of the following:
Quality Info. Displays QoS information: delay and packet loss, calculated according to previous
calls.
DNS Status Can be one of the following:
212
OK = Remote side responds to periodic connectivity queries.
Lost = Remote side did not respond for a short period.
Fail = Remote side does not respond.
Init = Connectivity queries not started (for example, IP address not
resolved).
Disable = Connectivity option is disabled (AltRoutingTel2IPMode equals 0
or 2).
Unknown = Recent quality information is not available.
OK
Poor
This field is applicable only if the parameter AltRoutingTel2IPMode is set to
2 or 3.
This field is reset if no QoS information is received for 2 minutes.
This field is applicable only if the parameter AltRoutingTel2IPMode is set to
2 or 3.
This field is reset if no QoS information is received for 2 minutes.
DNS Disable
DNS Resolved
DNS Unresolved
®
3Com VCX V7111 VoIP Gateway User Guide