3Com VCX v7111 User Manual page 33

View of the V7111 1x PORT Base
Figure 7
View of the V7111 1x PORT Base
Table 9
Item # Functionality
1 Square slot used to attach anti-slide bumpers (for desktop mounting)
2 Oval notch used to attach the V7111 1x PORT to a wall
3 Screw opening used to attach the V7111 1x PORT to a 19-inch shelf rack
Mounting the V7111 1x PORT on a Desktop
Attach the four (supplied) anti-slide bumpers to the base of the V7111 1x PORT (see item #1
in Figure 7) and place it on the desktop in the position you require.
Mounting the V7111 1x PORT on a Wall
To mount the V7111 1x PORT on a wall:
Drill four holes according to the following dimensions:
1
Side-to-side distance 140 mm.
Front-to-back distance 101.4 mm.
Insert a wall anchor of the appropriate size into each hole.
2
Fasten a DIN 96 3.5X20 wood screw (not supplied) into each of the wall anchors.
3
Position the four oval notches located on the base of the V7111 1x PORT (see item #2 in
4
Figure 7) over the four screws and hang the V7111 1x PORT on them.
®
3Com VCX V7111 VoIP Gateway User Guide
33