3Com VCX v7111 User Manual page 192

Web & Telnet Access List ini File Parameter
Table 62
Parameter Name in ini File
WebAccessList_x
Configuring the Firewall Settings
The V7111 accommodates an internal Firewall, allowing the security administrator to define
network traffic filtering rules. For detailed information on the internal Firewall, see
Firewall.
To create a new access rule:
Open the Firewall Settings screen (Advanced Configuration menu > Security Settings >
1
Firewall Settings option); the Firewall Settings screen is displayed.
Firewall Settings Screen
Figure 70
In the New Rule Index field, enter the index of the access rule that you want to add.
2
Click Add an Empty Rule; a new rule appears; alternatively, click Copy Selected Rule as
3
a New Rule; a new rule that is an exact copy of the currently selected rule appears.
Configure the rules parameters according to
4
Click one of the following buttons:
5
Apply Rule Settings to save the new rule (the rule is not active).
Activate Rule to save the new rule and activate it.
Delete Rule to delete the rule.
To save the changes so they are available after a power fail, see
6
192
Parameter Format
WebAccessList_0 = 10.13.2.66
WebAccessList_1 = 10.13.77.7
The default value is 0.0.0.0 (the gateway can be accessed from
any IP address).
This parameter can appear up to ten times.
Figure 70.
®
3Com VCX V7111 VoIP Gateway User Guide
Internal
Saving Configuration.