3Com VCX v7111 User Manual page 180
Voip
Hide thumbs
Also See for VCX v7111:
- User manual (245 pages) ,
- Installation manual (58 pages) ,
- Product manual (15 pages)
Table of Contents
Advertisement
Parameter
Dynamic Jitter Buffer Optimization
Factor
[DJBufOptFactor]
RTP Redundancy Depth
[RTPRedundancyDepth]
Packing Factor
[RTPPackingFactor]
Basic RTP Packet Interval
[BasicRTPPacketInterval]
This parameter should not be used.
Use the Coders screen under Protocol
Definition instead.
RTP Directional Control
[RTPDirectionControl]
RFC 2833 TX Payload Type
[RFC2833TxPayloadType]
RFC 2833 RX Payload Type
[RFC2833RxPayloadType]
RFC 2198 Payload Type
[RFC2198PayloadType]
Fax Bypass Payload Type
[FaxBypassPayloadType]
Enable RFC 3389 CN Payload Type
[EnableStandardSIDPayloadType]
Analog Signal Transport Type
[AnalogSignalTransportType]
180
Description
Dynamic Jitter Buffer frame error / delay optimization factor.
The valid range is 0 to 13.
The default factor is 10.
Set to 13 for data (fax & modem) calls.
For more information on the Jitter Buffer, see Dynamic
Jitter Buffer Operation.
Enter [0] to disable the generation of redundant packets (default).
Enter [1] to enable the generation of RFC 2198 redundancy
packets.
N/A.
Controlled internally by the gateway according to the selected coder.
N/A.
Controlled internally by the gateway according to the selected coder.
N/A.
Controlled internally by the gateway according to the selected coder.
N/A.
Use the ini file parameter RFC2833PayloadType instead.
N/A.
Use the ini file parameter RFC2833PayloadType instead.
RTP redundancy packet payload type, according to RFC 2198.
The range is 96-127. The default is 104.
Applicable if RTP Redundancy Depth=1
Determines the fax bypass RTP dynamic payload type.
The valid range is 96 to 120. The default value is 102.
Determines whether Silence Indicator (SID) packets that are sent
and received are according to RFC 3389.
Disable [0] = G.711 SID packets are sent in a proprietary method
(default).
Enable [1] = SID (comfort noise) packets are sent with the RTP
SID payload type according to RFC 3389. Applicable to G.711 and
G.726 coders.
This parameter is obsolete. Please use the parameter
HookFlashOption.
®
3Com
VCX V7111 VoIP Gateway User Guide
Advertisement
Table of Contents
