3Com VCX v7111 User Manual page 209

Voip
Hide thumbs Also See for VCX v7111:
Table of Contents

Advertisement

ini File Parameter Name
CptFileURL
FXSCoeffFileURL
UserInfoFileURL
AutoUpdateCmpFile
AutoUpdateFrequency
AutoUpdatePredefinedTime Schedules an automatic update to a predefined time of the day.
ResetNow
SNMP ini File Parameters
Table 71
describes the SNMP parameters that can only be configured using the ini file.
SNMP ini File Parameters
Table 71
ini File Parameter Name
SNMPPort
®
3Com
VCX V7111 VoIP Gateway User Guide
Description
Specifies the name of the CPT file and the location of the server (IP address
or FQDN) from which it is loaded.
https://server_name/file
http://server_name/file,
The maximum length of the URL address is 99 characters.
Specifies the name of the FXS coefficients file and the location of the server
(IP address or FQDN) from which it is loaded.
https://server_name/file
http://server_name/file,
The maximum length of the URL address is 99 characters.
Specifies the name of the User Information file and the location of the server
(IP address or FQDN) from which it is loaded.
https://server_name/file
http://server_name/file,
The maximum length of the URL address is 99 characters.
Enables / disables the Automatic Update mechanism for the cmp file.
0 = The Automatic Update mechanism does not apply to the cmp file
(default).
1 = The Automatic Update mechanism includes the cmp file.
Determines the number of minutes the gateway waits between automatic
updates.
The default value is 0 (the update at fixed intervals mechanism is disabled).
The range is 'HH:MM' (24-hour format).
For example: 20:18.
The actual update time is randomized by five minutes to reduce the
load on the Web servers.
Invokes an immediate restart of the gateway.
This option can be used to activate offline (not on-the-fly) parameters that are
loaded using IniFileUrl.
0 = The immediate restart mechanism is disabled (default).
1 = The gateway immediately restarts after an ini file with this parameter set
to 1 is loaded.
Description
The devices local UDP port used for SNMP Get/Set commands.
The range is 100 to 3999.
The default port is 161.
.
.
.
209

Advertisement

Table of Contents
loading

Table of Contents