Configuring The Trunk Settings - 3Com VCX V7122 Installation Manual

28 C 3: C
HAPTER ONFIGURING THE
Configuring the
Trunk Settings
V7122 M
EDIA
to complete. When the V7122 completes the restart, the Ready and LAN
LEDs on the front panel are lit green.
11 After the gateway is reset, configure the V7122 trunk parameters. For
information on configuring the trunk parameters, see
Trunk Settings, next.
To configure the trunk settings, perform these steps:
1 Access the Embedded Web Server (see
Server).
2 Open the Trunk Settings screen (Advanced Configuration menu >
Trunk Settings); the screen appears with the parameter fields grayed
(indicating read-only), and the Stop Trunk button is displayed at the
bottom of the screen (indicating that the trunk is currently active). The
Trunk Status indicators appear colored.
indicators and their descriptions.
Figure 10 Trunk Settings Screen
G
ATEWAYS
Configuring the
Accessing the Embedded Web
Table 6 shows the possible