3Com VCX v7111 User Manual page 142

Caller ID ini File Parameter
Table 43
Parameter Name in ini File
CallerDisplayInfoX
Generate Caller ID to Tel
The Generate Caller ID to Tel screen for FXS and Caller ID Permissions screen for FXO are
used to enable or disable (per port) the Caller ID generation (for FXS gateways) and
detection (for FXO gateways). If a port is not configured, its Caller ID generation / detection
are determined according to the global parameter EnableCallerID (described in
To configure the Generate Caller ID to Tel Table:
Open the Generate Caller ID to Tel screen (Protocol Management menu > Endpoint
1
Settings > Generate Caller ID to Tel option); the Generate Caller ID to Tel screen is
displayed.
V7111 FXS Generate Caller ID to Tel Screen
Figure 50
In the Caller ID field, select one of the following:
2
Enable: Enables Caller ID generation (FXS) or detection (FXO) for the specific port.
Disable: Caller ID generation (FXS) or detection (FXO) for the specific port is
disabled.
Empty: Caller ID generation (FXS) or detection (FXO) for the specific port is
determined according to the parameter EnableCallerID (described in
142
Parameter Format
CallerDisplayInfo<Port> = <Caller ID string>,<Restriction>
0 = Not restricted (default).
1 = Restricted.
For example:
CallerDisplayInfo0 = Susan C.,0
CallerDisplayInfo2 = Mark M.,1
The numbering of channels starts with 0.
This parameter can appear up to eight times for 8-port
gateways, and up to 24 times for V7111 24 PORT.
®
3Com VCX V7111 VoIP Gateway User Guide
Table 24).
Table 24).