Cabling The V7111 1X Port - 3Com VCX v7111 User Manual

Installing the V7111 1x PORT in a 19-inch Rack
The V7111 1x PORT can be installed in a standard 19-inch rack by placing it on an 3Com'
19-inch rack-mounting shelf that is pre-installed in the rack. The shelf can hold up to two
V7111 1x PORT gateways. This shelf can be ordered separately from 3Com.
The 19-inch rack shelf is not supplied in the standard package kit, but can be
ordered separately (Bulk Pack package MCMK00015 with 10 rack mounting shelves
for V7111 1x PORT). For ordering and pricing, please contact your 3Com distributor.
V7111 1x PORT Rack Mount
Figure 8
1
V7111 1x PORT Rack Mount
Table 10
Item # Functionality
1 Standard rack holes used to attach the shelf to the rack
2 Eight shelf-to-device screws
To install the V7111 1x PORT in a 19-inch rack:
Use the shelf-to-device screws (supplied) to attach one or two V7111 1x PORT devices
1
to the shelf.
Position the shelf in the rack and line up its side holes with the rack frame holes.
2
Use four standard rack screws (not supplied) to attach the shelf to the rack.
3

Cabling the V7111 1x PORT

Cable your V7111 1x PORT according to each section of
on the V7111 1x PORT rear panel connectors, see
34
2
Table 11. For detailed information
Table 4.
®
3Com VCX V7111 VoIP Gateway User Guide