3Com VCX v7111 User Manual page 227

To load an auxiliary file to the gateway:
Open the Auxiliary Files screen (Software Upgrade menu > Load Auxiliary Files); the
1
Auxiliary Files screen is displayed.
Click the Browse button that is in the field for the type of file you want to load.
2
Navigate to the folder that contains the file you want to load.
3
Select the file and click the Open button; the name and path of the file appear in the field
4
beside the Browse button.
Click the Send File button that is next to the field that contains the name of the file you
5
want to load. An exclamation mark in the screen section indicates that the files loading
does not take effect on-the-fly (for example, CPT file).
Repeat Steps 2 to 5 for each file you want to load.
6
Saving an auxiliary file to flash memory may disrupt traffic on the V7111 gateway.
To avoid this, disable all traffic on the device before saving to flash memory.
A V7111 gateway reset is required to activate a loaded CPT file, and may be
required for the activation of certain ini file parameters.
To save the loaded auxiliary files so they are available after a power fail, see
7
Configuration.
To reset the V7111 gateway, see
8
®
3Com VCX V7111 VoIP Gateway User Guide
Resetting the V7111 Gateway.
Saving
227