3Com VCX v7111 User Manual page 169
Voip
Hide thumbs
Also See for VCX v7111:
- User manual (245 pages) ,
- Installation manual (58 pages) ,
- Product manual (15 pages)
Table of Contents
Advertisement
Parameter
Control VLAN ID
[VlanControlVlanID]
Media VLAN ID
[VlanMediaVlanID]
Priority Settings
Network Priority
[VlanNetworkServiceClassPriority]
Media Premium Priority
[VlanPremiumServiceClassMediaPrio
rity]
Control Premium Priority
[VlanPremiumServiceClassControlPri
ority]
Gold Priority
[VlanGoldServiceClassPriority]
Bronze Priority
[VlanBronzeServiceClassPriority]
ini File Parameters
EnableDNSasOAM
EnableNTPasOAM
VlanSendNonTaggedOnNative
Network Settings ini File Parameters
Table 55
describes the Network parameters that can only be configured using the ini file.
Network Settings, ini File Parameters
Table 55
ini File Parameter Name
EnablePPPoE
PPPoEUserName
®
3Com
VCX V7111 VoIP Gateway User Guide
Description
Sets the control VLAN identifier.
The valid range is 1 to 4094. The default value is 2.
Sets the media VLAN identifier.
The valid range is 1 to 4094. The default value is 3.
Sets the priority for Network service class content.
The valid range is 0 to 7. The default value is 7.
Sets the priority for the Premium service class content and media
traffic.
The valid range is 0 to 7. The default value is 6.
Sets the priority for the Premium service class content and control
traffic.
The valid range is 0 to 7. The default value is 6.
Sets the priority for the Gold service class content.
The valid range is 0 to 7. The default value is 4.
Sets the priority for the Bronze service class content.
The valid range is 0 to 7. The default value is 2.
Determines the traffic type for DNS services.
[1] = OAM VLAN (default).
[0] = Control VLAN.
Determines the traffic type for NTP services.
[1] = OAM VLAN (default).
[0] = Control VLAN.
Specify whether to send non-tagged packets on the native VLAN.
[0] = Sends priority tag packets (default).
[1] = Sends regular packets (with no VLAN tag).
Valid Range and Description
Enables the PPPoE (Point-to-Point Protocol over Ethernet) feature.
[0] = Disable (default)
[1] = Enable
User Name for PAP or Host Name for CHAP authentication. The valid
range is a string of up to 47 characters. The default value is 0.
169
Advertisement
Table of Contents
