3Com VCX v7111 User Manual page 86

DTMF & Dialing Screen
Figure 28
Configure the DTMF & Dialing parameters according to
2
Click the Submit button to save your changes.
3
To save the changes so they are available after a power fail, see
4
DTMF & Dialing Parameters
Table 22
Parameter
Max Digits in Phone Num
[MaxDigits]
Digit Mapping Rules can be
used instead.
Inter Digits Timeout for
Overlap Dialing [sec]
[TimeBetweenDigits]
86
Description
Maximum number of digits that can be dialed.
The valid range is 1 to 49.
The default value is 5.
Dialing ends when the maximum number of digits is dialed, the
Interdigit Timeout expires, the '#' key is dialed, or a digit map pattern is
matched.
Time in seconds that the gateway waits between digits dialed by the user.
When the Interdigit Timeout expires, the gateway attempts to dial the digits
already received.
The valid range is 1 to 10 seconds. The default value is 4 seconds.
Table 22.
Saving
®
3Com VCX V7111 VoIP Gateway User Guide
Configuration.