Crankshaft Pulley And Oil Seal - Suzuki RA410 Manual

CRANKSHAFT PULLEY AND OIL SEAL

3 100 N·m (10.0 kg-m)
1
1
2
4
REMOVAL
1) Remove front bumper.
2) Disconnect negative cable at battery.
3) Remove water pump (generator) belt (1) and A/C compressor
drive belt (2).
2
4) Remove crankshaft pulley (1) with crankshaft locked as shown
in figure.
5) Remove oil seal.
1
ENGINE MECHANICAL 6A4-23
1. Timing chain cover
2. Crankshaft pulley
: Tightening Torque
3. Crankshaft pulley bolt
: Do not reuse
4. Oil seal