Navigation Symptom Diagnosis (If Equipped); Ignition Switch Removal And Installation; Ignition Switch Inspection - Suzuki Swift Sport 2004 Service & Repair Manual

Navigation Symptom Diagnosis (If Equipped)

Condition
No displaying of
navigation

Ignition Switch Removal and Installation

Removal
1) Disconnect negative (–) cable at battery.
2) Confirm that ignition key is removed.
3) Remove steering column hole cover (1).
4) Turn steering wheel to remove steering column
cover screws (3) and then remove steering column
covers (2).
2
1
5) Disconnect couplers (1) from ignition switch (2).
6) Remove ignition switch (2) from key cylinder (3).
2
1
Installation
Reverse removal procedure.
Possible cause
Circuit fuse Blown
Wiring and/or grounding faulty
Navigation unit faulty
Repair Instructions
S7RS0B9306001
3
I4RS0B920004-02
1
3
I4RS0A930008-01
Instrumentation / Driver Info. / Horn:
Correction / Reference Item
Replace fuse and check for short circuit.
Repair as necessary.
Replace unit.

Ignition Switch Inspection

• Check for continuity between terminals at each switch
position. If check result is not as specified, replace
switch.
ST IG2
B2
IG1 ACC
B1
Terminal
B1 B2
Key Position
OUT
LOCK
ACC
IN
ON
START
Ignition knob switch
(with keyless start system only)
OFF (ignition knob switch released)
ON (ignition knob switch pushsed)
9C-14
S7RS0B9304019
S7RS0B9306002
K2
P2
P1
K1
ACC IG1 IG2 ST K1 K2
Terminal P1 P2
I5RS0D930003-02