Suzuki Swift Sport 2004 Service & Repair Manual page 1142

8B-104 Air Bag System:
5) Remove passenger air bag (inflator) module (1) from
air bag hole cover (2).
1
2
WARNING
!
• When carrying a live air bag (inflator)
module, make sure the bag opening is
pointed away from you.
Never carry air bag (inflator) module by
wires or connector on the side of the
module. In case of an accidental
deployment, the bag will then deploy with
minimal chance of injury.
• As the live passenger air bag (inflator)
module must be kept with its bag (trim
cover) facing up while being stored or left
standing, place it on the workbench with a
slit facing down or use the workbench vise
to hold it securely at its lower mounting
bracket. This is necessary so that a free
space is provided to allow the air bag to
expand in the unlikely event of accidental
deployment.
• Observe "Precautions on Handling and
Storage of Air Bag System Components"
for handling and storing it.
Otherwise, personal injury may result.
Installation
1) Install passenger air bag (inflator) module to air bag
hole cover (2).
CAUTION
!
Confirm claw (1) of passenger air bag
(inflator) module hangs in air bag hole cover
(2).
I4RS0A820063-01
2) Install passenger air bag (inflator) module with air
bag hole cover (1) to instrument panel as shown.
3) Tighten passenger air bag (inflator) module attaching
bolts (1) to specified torque.
Tightening torque
Passenger air bag (inflator) module attaching
bolt (a): 23 N·m (2.3 kgf-m, 16.5 lb-ft)
2
1
"A" "A"
"A"
1,(a)
1
I4RS0A820064-01
I4RS0A820062-01
I4RS0A820065-01