Dtc B1044: Passenger Air Bag Initiator Circuit Short To Power Circuit - Suzuki Swift Sport 2004 Service & Repair Manual

Step
3 1) With ignition switch OFF, disconnect special tools (B)
and (C) from "L32" connector and SDM connector "L29"
from SDM respectively.
2) Release shorting bar in SDM connector inserting release
tool (1) included in special tool (A).
3) Measure resistance between "L29-5" terminal and body
ground and between "L29-6" terminal and body ground.
Special tool
(A): 09932-76010
(B): 09932-75010
(C): 09932–77320
"L32"
DRIVER
STEERING WHEEL
Is resistance infinity?
NOTE
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components and ensure all components are properly mounted.
• Clear DTCs referring to "DTC Clearance", if any.
• Repeat "Air Bag Diagnostic System Check" to confirm that the trouble has been corrected.

DTC B1044: Passenger Air Bag Initiator Circuit Short to Power Circuit

Wiring Diagram
1
2
[A]
[A]: Shorting bar
1. From main fuse
2. Ignition switch
Action
"L29-5" "L29-6"
(C)
PASSENGER
(B)
"L04"
4
RED
GRN
"G32"
3
BLK
7
"L29"
3. "A/BAG" fuse
4. Junction block assembly
5. SDM
Yes
Substitute a known-
good SDM and recheck.
(A)
I7RS0A820036-01
5
"L29"
L29-27 IG
BLU/RED
P+ L29-5
YEL/RED
P-
L29-6
L29-28 E1
6. Passenger air bag (inflator) module
7. Ground for air bag system
Air Bag System:
No
"BLU/RED" or "YEL/
RED" circuit shorted to
ground in floor harness.
"L32" "G04"
"G10"
BLU/RED
6
YEL/RED
8B-53
S7RS0B8204025
I7RS0A820013-06