Dtc B1063 / B1067: Driver / Passenger Side-Air Bag Initiator Circuit Short To Ground - Suzuki Swift Sport 2004 Service & Repair Manual

8B-70 Air Bag System:
Step
3 1) With ignition switch OFF, disconnect special tools (B)
and (C) then reconnect connector "L25" or "L30".
2) Disconnect side-air bag (inflator) module connector (1)
from side-air bag (inflator) module.
3) Check proper connection to side-air bag (inflator)
module at terminal in connector.
4) If OK, then connect special tools (A), (B) and (C) to side-
air bag (inflator) connector.
Special tool
(A): 09932–76010
(B): 09932–75010
(C): 09932–78310
"L25", "L30"
5) Check SDM DTC.
With ignition switch ON, is DTC B1062 or B1066 still
indicated?
NOTE
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components, ensure all components are properly mounted.
• Clear DTCs referring to "DTC Clearance", if any.
• Repeat "Air Bag Diagnostic System Check" to confirm that the trouble has been corrected.

DTC B1063 / B1067: Driver / Passenger Side-Air Bag Initiator Circuit Short to Ground

Wiring Diagram
1
2
[A]
[A]: Shorting bar
1. From main fuse
2. Ignition switch
Action
1
(A)
STEERING WHEEL
"L04"
4
RED
GRN
"G32"
3
BLK
8
3. "A/BAG" fuse
4. Junction block assembly
5. SDM
DTC B1062: Repair
short from "GRY/RED"
wire circuit to "GRY"
wire circuit in seat
harness or from "GRY/
RED" or "GRY" wire
circuit to other wire
circuit.
DTC B1066: Repair
short from "BRN/WHT"
wire circuit to "BRN"
wire circuit in seat
harness or from "BRN/
WHT" or "BRN" wire
circuit to other wire
circuit.
(C)
(B)
I4RS0A820034-01
5 "L29"
L29-12
DS+
L29-27 IG
DS- L29-11
PS+ L29-13
L29-28 E1
PS- L29-14
"L29"
6. Driver side-air bag (inflator) module
7. Passenger side-air bag (inflator) module
8. Ground for air bag system
Yes
Replace side-air bag
(inflator) module
referring to "Side-Air
Bag (Inflator) Module
Removal and
Installation".
"L25"
GRY/RED
6
GRY
BRN/WHT
7
BRN
"L30"
No
S7RS0B8204032
I7RS0A820020-04