Repair Instructions - Suzuki Swift Sport 2004 Service & Repair Manual

8B-98 Air Bag System:
• Side-sensor
– Check sensor (1) and under body (2) for dents,
cracks, deformation or rust.
– Check sensor connector (sensor side and harness
side) (3) or sensor lead wire (4) for damage, crack,
scorching or melting.
• Seat belt pretensioner
– Check for dents, cracks, damage or fitness
– Check harness and connector for damage or
tightness.
1. Seat belt
2. Retractor assembly
Disabling Air Bag System
1) Turn steering wheel so that vehicle's wheels (front
tires) are pointing straight ahead.
2) Disconnect negative (–) cable at battery.
3) Turn ignition switch to "LOCK" position and remove
key.
4) Remove "A/BAG" fuse from fuse box.
5) Pull out glove box while pushing its stopper from
both right and left sides and disconnect yellow
connector (1) for driver and passenger air bags as
follows.
a) Release locking of lock slider (2).
b) After unlocked, disconnect connector.
2
4
1 3
I4RS0A820051-01
I3JA01820043-01

Repair Instructions

S7RS0B8206001
• Seat belts and mounting points
– Refer to "Front Seat Belt Components in Section
8A".
• "AIR BAG" warning right
– After vehicle is completely repaired, perform "Air
Bag Diagnostic System Check".
• Side-air bag (inflator) module
– Check for dents, cracks, damage or fitness.
– Check trim cover for cracks or deformities.
– Check wire harness and connector for damage or
tightness.
• Side curtain-air bag (inflator) module
– Check for dents, cracks, damage or fitness.
– Check harness wire harness and connector for
damage or tightness.
– Check headlining for cracks or deformation.
6) If equipped with side-air bag (inflator) module,
disconnect yellow connector of side-air bag (inflator)
module under front seat cushion (3).
a) Release locking of lock slider.
b) After unlocked, disconnect connector.