Suzuki Swift Sport 2004 Service & Repair Manual page 1163

Tightening Torque Specifications
Fastening part
SDM bolt
Driver air bag (inflator) module mounting bolt
Passenger air bag (inflator) module attaching
bolt
Sleeve lock nut
Side curtain-air bag (inflator) module attaching
bolts
Forward-sensor mounting bolt
Side-sensor bolt
NOTE
The specified tightening torque is also described in the following.
"Air Bag System Components, Wiring and Connectors Location"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".
Use of Special Tools
WARNING
!
To avoid deployment when troubleshooting
the air bag system, do not use electrical test
equipment such as a battery powered or AC
powered voltmeter, ohmmeter, etc., or any
type of electrical equipment other than that
specified. Do not use a non-powered probe
type tester.
Instructions must be followed carefully,
otherwise personal injury may result.
Specifications
N⋅m
9
9
23
2.5
11
9
9
Special Tools and Equipment
You should be familiar with the tools listed under the
S7RS0B8208001
heading "Special Tool". You should be able to measure
voltage and resistance. You should be familiar with
proper use of a scan tool such as Air Bag Driver /
Passenger Load Tool, Connector Test Adapter Kit and
the Digital Multimeter.
Special tool
(A): 09932–76010 Connector Test Adapter Kit
This must be used whenever a diagnostic procedure
requests checking or probing a terminal.
Using the appropriate adapter in the special tool will
ensure that no damage to the terminal will occur from the
multimeter probe, such as spreading or bending.
Tightening torque
kgf-m lb-ft
0.9 6.5
0.9 6.5
2.3 16.5
0.25 2.0
1.1 8.0
0.9 6.5
0.9 6.5
Air Bag System: 8B-125
S7RS0B8207001
Note
I3JA01820041-01