Headlight Leveling Switch Inspection (If
Equipped)
Check for resistance between terminals at each switch
position.If check result is not as specified, replace
switch.
1
2
3
Switch Position
-
0
1
2
3
4
S7RS0B9206019
Terminal
Resistance ( )
4370 - 4830
1 and 2
646 - 714
1 and 3
3724 - 4116
2 and 3
1292 - 1428
1 and 3
3078 - 3402
2 and 3
1938 - 2142
1 and 3
2 and 3
2432 - 2688
1 and 3
2584 - 2856
2 and 3
1786 - 1974
1 and 3
3230 - 3570
2 and 3
1140 - 1260
I4RS0B920012-01
Headlight Leveling Actuator Inspection (If
Equipped)
1) Make sure all couplers of headlight and leveling
actuator are connected securely.
2) Park vehicle in front of blank wall (screen).
3) Turn ignition switch to ON position.
4) Turn lighting switch to "HEAD" position.
5) Move headlight leveling switch and check that
optical axes of headlights reflected on blank wall
(screen) change then.Also check that leveling
actuator sounds slightly while moving leveling
switch. If optical axes do not change, go to
"Headlight Leveling System Symptom Diagnosis (If
Equipped)".
Lighting Systems:
9B-13
S7RS0B9206020