Suzuki Swift Sport 2004 Service & Repair Manual page 1159

Deployment / Activation Inside of Vehicle
When the vehicle will be destroyed, or salvaged for
component parts, deploy the air bag modules and/or
activate seat belt pretensioners installed on vehicle.
NOTE
If equipped with the seat belt pretensioners,
activate both side of seat belt pretensioners
at the same time when using special tool (C).
1) Turn ignition switch to LOCK position, remove key
and put on safety glasses.
2) Remove all loose objects from front seats and
instrument panel.
3) Disconnect air bag (inflator) module or seat belt
pretensioner connector as follows.
• For driver and passenger air bag (inflator) module
[A]
Remove glove box from instrument panel and
disconnect driver and passenger air bag (inflator)
module connector (1).
• For side-air bag (inflator) module [B]
Disconnect side-air bag (inflator) module
connectors (2) under front seat cushion.
• For side curtain-air bag (inflator) module [C]
Remove rear pillar trim and disconnect side
curtain-air bag (inflator) module connectors (3).
• For seat belt pretensioners (right and left) [D]
Remove both side (driver and passenger side)
center pillar lower trim and disconnect seat belt
pretensioner connectors (4).
4) Confirm that each air bag (inflator) module and/or
seat belt pretensioners is securely mounted.
Air Bag System:
[A]
1
1
2
[B]
1
2
[C]
3
[D]
4
8B-121
2
1
2
1
2
I4RS0A820093-01