Dtc B1361 / B1365: Driver / Passenger Side Curtain-Air Bag Initiator Circuit Resistance High - Suzuki Swift Sport 2004 Service & Repair Manual

8B-84 Air Bag System:

DTC B1361 / B1365: Driver / Passenger Side Curtain-Air Bag Initiator Circuit Resistance High

Wiring Diagram
1
2
[A]
[A]: Shorting bar
1. From main fuse
2. Ignition switch
CAUTION
!
• Be sure to perform "Air Bag Diagnostic System Check" before starting diagnosis according to flow.
• When measurement of resistance or voltage is required in this flow, use a tester along with a correct
terminal adapter from special tool (Connector test adapter kit).
• When a check for proper connection is required, refer to "Inspection of Intermittent and Poor
Connections".
• If there is open circuit in the air bag wire harness, connector or terminal is found damaged, replace
the wire harness, connector and terminal as an assembly.
DTC Will Set when
The combined resistance of the side curtain-air bag (inflator) module (driver or passenger), harness wiring and
connector terminal contact is above a specified value for specified time.
Flow Test Description
Step 1: Check whether malfunction is in side curtain-air bag (inflator) module.
Step 2: Check side curtain-air bag initiator circuit.
"L04"
4
RED
GRN
"G32"
3
BLK
8
"L29"
3. "A/BAG" fuse
4. Junction block assembly
5. SDM
5 "L29"
YEL/GRN
L29-20
DC+
L29-27 IG
YEL/BLU
DC- L29-19
BLK/YEL
PC+ L29-21
L29-28 E1
BRN/YEL
PC- L29-22
6. Driver side curtain-air bag (inflator) module
7. Passenger side curtain-air bag (inflator) module
8. Ground for air bag system
S7RS0B8204043
"L18"
6
7
"L41"
I7RS0A820031-04