System Fails Power-On Tests - PictureTel Venue-2000 User's Notebook

System Fails Power-On Tests

Your system performs several tests when you power it on. These tests, called
Rapid Power-On Tests (RPOT), check the hardware components and system
software.
If these tests are successful, the message
corner of your monitor.
These are the steps you can take if your system fails the RPOT.
If you have this symptom...
An error message occurs
during the power-on process.
PictureTel Ready
Do this...
1. Make sure that all cables are securely
connected to the electronics module.
2. Press ENTER to run more tests.
3. If the test results show a video, audio, or
network problem, refer to the lists in this
section or refer to the online manual to try
to find out what the problem is.
If you still canÕt Þx the problem or the tests
show a defective component, contact your
PictureTel service provider.
If the tests show that thereÕs a problem with
the network, contact your network service
provider.
appears in the upper left
57