Table of Contents
Advertisement
System Fails Power-On Tests
Your system performs several tests when you power it on. These tests check the
hardware components and system software.
If these tests are successful,
your monitor.
These are the steps to take if your system fails the power-on tests.
If you have this symptom...
A failure message appears
during the power-on process.
84
appears in the upper left corner of
PictureTel Ready
1. Make sure that all cables are securely
connected to the electronics module.
2. Press any key to continue.
3. Refer to the lists under this tab to try to
figure out the problem.
Do this...
Advertisement
Table of Contents
