Setting Camera Presets - PictureTel Venue-2000 User's Notebook

Setting Camera Presets

You may know before a videoconference that during the conference you will want
the camera to point at a particular person or location, such as at the main speaker
or at a whiteboard. Camera presets are buttons that let you set and store camera
positions either before or during a meeting.
After you set a camera preset, you simply press the preset number button (for
example, ) to make the camera move to that stored position.
1
You can set or change the presets at any time, but itÕs better to do
it before you start your meeting so that you can easily use them
during the videoconference.
Also, when you Þrst press the
camera automatically centers and zooms out to show more of the
room. We recommend that you keep it set like this or adjust it
slightly to get a better view of the room.
To set a camera preset with the wireless keypad:
1. Select the camera you want to preset by pressing the appropriate SEND button
(for a near-end camera) or RECEIVE button (for a far-end camera).
You can only set presets for the far-end site if that site is conÞgured to allow
far-end camera control.
2. Adjust the camera by pressing POINT and ZOOM in the NEAR END section of
the keypad (or by using the manual controls on the camera, if it has them).
Keep doing this until the camera shows the image exactly the way you want
it.
3. Press SET in the NEAR END or FAR END section of the keypad.
4. Press a preset number button or SHOW ROOM to store that camera position.
You can also press the blue button or
to store a preset position for that button.
button, the main
SHOW ROOM
on the Look-At-Me-Button
SHOW ROOM
39