Adjusting The Input/Output Gain (Calibration Function) - Yamaha M7CL Owner's Manual

Adjusting the input/output gain (Calibration function)

If necessary, you can make fine adjustments to the input/output gain.
1
While holding down the SCENE MEMORY
[STORE] key of the panel, turn on the
power.
After the opening screen, the following startup menu
screen will appear.
2
In the MODE SELECT field, select the item
you want to adjust, and press the button.
The corresponding setting screen will appear.
You can make the following three gain adjustments for
analog input/output.
• INPUT PORT TRIM (Fine adjustment of the
analog input gain)
...........Access the INPUT PORT TRIM win-
dow, and make fine adjustments to
the gain of the specified analog
input port in 0.1 dB steps.
Adjusting the input/output gain (Calibration function)
• OUTPUT PORT TRIM (Fine adjustment of the
output ports)
........... Access the OUTPUT PORT TRIM
window, and make fine adjustments
to the gain of the specified analog
output port in 0.01 dB steps.
• SLOT OUTPUT TRIM (Fine adjustment of the out-
put ports)
........... Access the SLOT OUTPUT TRIM
window, and make fine adjustments
to the gain of the output ports of the
specified slot in 0.01 dB steps.
3
Press a knob to select it, and use the multi-
function encoders to adjust the value.
If you press the RESET ALL button provided in each
screen, all settings in the screen will be reset to 0 dB.
The factory settings are also 0 dB.
4
Press the EXIT button.
The M7CL will start up in normal operating mode.
HINT
• Alternatively, you can continue by selecting a different menu
instead of pressing the EXIT button.
241
M7CL Owner's Manual
20