Global Pre/Post; Stereo Mix Pan - Yamaha M7CL StageMix V5 User Manual

Yamaha Professional Audio
state and can be pressed to change the state. The [PRE] button
appears yellow when On and grey when Off.

4.8.4 Global PRE/POST

Press and hold a [PRE] button to make global Pre or Post fader
assignments. A popup will appear providing the following options:
• ALL MIX/MATRIX BUSSES PRE FOR THIS CHANNEL
• ALL MIX/MATRIX BUSSES POST FOR THIS CHANNEL
• CURRENT MIX/MATRIX BUS PRE FOR ALL CHANNELS
• CURRENT MIX/MATRIX BUS POST FOR ALL CHANNELS

4.8.5 Stereo Mix Pan

When a Stereo Mix Bus is active as the "Target Mix Bus", a Pan slider
will be available at the top of each channel strip in "SENDS ON
FADERS" mode. Adjusting this slider will change the Pan position for
that channel's send to the currently active Stereo Mix Bus. The Pan
position's numerical value appears above the slider.
If the Pan Link function is active for the currently active Stereo Mix Bus,
a link icon will appear below the Pan slider. When Pan Link is active,
adjusting a channel's Pan slider will affect the Pan parameter for that
channel to the Master Stereo Bus and all other linked Stereo Mix
Busses.
Note: Pan Link mode for each Stereo Mix Bus can only be activated in
the console, not from StageMix.
To exit "SENDS ON FADERS" mode, press the [SENDS ON FADERS] button
in the left column.
M7CL StageMix V5 User Guide
Page 18