Meter Screen - Yamaha TF5 Reference Manual

METER screen

Displays the input and output level of all the channels, and allows you to select the metering
point (i.e., the point at which the level is detected).
1
Input metering point selection menu
Select the input level metering point from the menu.
PRE HPF: After the head amp; before the HPF
PRE FADER: Before the fader
POST ON: After the [ON] key
2
Output metering point selection menu
Select the output level metering point from the menu.
PRE EQ: Before the EQ
PRE FADER: Before the fader
POST ON: After the [ON] key
3
Peak Hold button
Turn this button on to hold the peak level for each level meter. Turn this button off to
remove the peak level that was being held. The Peak Hold on/off setting affects both
input and output channels.
NOTE
You can assign the Peak Hold button to a [USER DEFINED KEY]. (page 27)
- 13 -
4
Meters
Display the input and output levels of the channels.
5
Meter display selection button
Allows you to select how many meters are displayed. Three display modes are available.
Toolbar
TF Series
Reference Manual