Charging System
Drive Belt Auto-tensioner Replacement
1. Remove the drive belt (see page 4-32).
2. Remove the power steering (p/S) pump without
disconnecting the p/S hoses,
22 N.m 12.2 kgl.m, 16lbf.frl
3. Remove the tensioner pulley.
8 x 1.25 mm
kgt.m,41 lbf.ft)
4-34
I
4. Remove the auto-tensioner.
8 x 1.25 mm
22 N.m {2.2 kgf.m, i6 tbf.ft)
5. Install in the reverse order of removar.