Ford Ranger Maintaince And Repair Manual page 702

Hide thumbs Also See for Ranger:

Table of Contents

On vehicles equipped with an automatic transmission, perform the following:

Remove the two screws attaching the PRNDL indicator to the cluster.

If necessary for clearance, block the wheels and apply the parking brake, then turn the

ignition switch to unlock the steering wheel and pull the gear select lever into the Low (L)

Pull the cluster assembly rearward to gain access to the speedometer cable.

If there is insufficient slack in the cable for gaining access, disconnect the cable from the transmission.

Once disconnected pull the cluster out gently until enough clearance is gained.

HOW TO USE THIS BOOK

Exploded view of the PRNDL indicator mounting

Click to enlarge

REMOVAL & INSTALLATION

Troubleshooting

Mountaineer Explorer