Ford Ranger Maintaince And Repair Manual page 1001

... and disconnect the pivot hook from the adjusting lever. Wind the starwheel all the way in
4. Pull the adjusting lever, cable and automatic adjuster spring down and toward the rear to unhook the
pivot hook from the large hole in the secondary shoe web. Do not attempt to pry the pivot hook from
the hole.
5. Remove the automatic adjuster spring and the adjusting lever.
6. Remove the primary shoe−to−anchor spring with a brake tool. (Brake tools are very common and are
available at auto parts stores). Remove the secondary shoe−to−anchor spring and unhook the cable
anchor. Remove the anchor pin plate.
REMOVAL & INSTALLATION
HOW TO USE THIS BOOK
Disconnect the adjuster lever return spring from the lever ...
1021