Removal & Installation - Ford Ranger Maintaince And Repair Manual

REMOVAL & INSTALLATION
Always install a new gasket whenever the oil level sensor is removed
1. Turn the engine OFF.
2. Raise the front of the vehicle and install jackstands beneath the frame. Firmly apply the parking brake
and place blocks in back of the rear wheels.
Typical low oil level sensor mounting−note: the sensor is constantly submerged in oil, therefore,
3. Drain at least 2 quarts (1.9 liters) of engine oil out of the pan.
246
HOW TO USE THIS BOOK
Low oil level indicator wiring schematic
Click to enlarge
drain some oil out of the engine before removing it
TESTING