Center Console; Removal & Installation - Ford Ranger Maintaince And Repair Manual

17. Carefully tilt the instrument panel forward and remove it from the vehicle. Work the instrument panel
around the steering wheel.
To install:
18. If the instrument panel is being replaced, transfer all mounting brackets and switches to the new
panel.
19. Position the instrument panel inside the vehicle and install the 4 screw that retain it along the top.
20. Install the retaining screws on the left and right sides. Make sure the instrument panel is properly
mounted.
Making sure the instrument panel is positioned correctly at this point, will avoid problems with fit and
rattles, after its installed. Also check for pinched or cut wires.
21. Install the mouldings and the trim panels.
22. Connect the heater/air conditioning controls and all of the instrument panel switches.
23. Connect the wiring to the steering column switches.
24. Install the instrument cluster, radio and ashtray assemblies.
25. Install the instrument cluster finish panel.
26. Install the steering column shrouds.
27. Reconnect all wiring connectors in the engine compartment.
28. Connect the negative battery cable.
29. Check the operation of ALL accessories.

Center Console

REMOVAL & INSTALLATION
Center Console
HOW TO USE THIS BOOK
1117