Ford Ranger Maintaince And Repair Manual page 1068

Explorer/Mountaineer and 1993−99 Ranger outside rear view mirror
1. Except for 1991−92 Ranger models, the door panel must first be removed to gain access to the
mounting nuts. Disconnect the harness connector if equipped with power mirrors.
2. Remove the mounting screws or nuts and lift off the mirror. Remove and discard the gasket.
3. When installing, make sure the gasket is properly positioned before tightening the screws.
4. If equipped with power mirror, plug in the electrical connector and test the operation of the power
mirror before installing the door panel.
To remove the outside mirror, first remove the door trim panel and peel back the padding to
REMOVAL & INSTALLATION
HOW TO USE THIS BOOK
Click to enlarge
access the nuts (arrow)
1091