STARTING SYSTEM
General Information
The starting system is designed to rotate the engine at a speed fast enough for the engine to start. The starting
system is comprised of the following components:
•
Permanent magnet gear−reduction starter motor with a solenoid−actuated drive
•
Battery
•
Remote control starter switch (part of the ignition switch)
Park/Neutral Position (PNP) or Manual Lever Position (MLP) switch (on 1994 automatic
•
transmission models) or Transmission Range (TR) sensor (on 1995−99 automatic transmission
models)
•
Clutch Pedal Position (CPP) switch (on manual transmission models)
•
Starter relay
•
Heavy circuit wiring
STARTING SYSTEM
Exploded view of the coil type starter
Click to enlarge
227