Ford Ranger Maintaince And Repair Manual page 1072

3. Remove the bolt attaching the rear lower end of the fender to the lower corner of the cab.
4. From inside the cab, remove the bolt attaching the rear end of the fender to the cowl.
5. Remove the screws around the wheel opening attaching the fender apron.
6. On 1993−99 models remove the bolt attaching the lower rear of the fender to the rocker.
7. Remove the bolts along the top of the apron attaching the fender.
8. Remove the bolt attaching the brace to radiator support assembly.
9. Remove the fender and remove the brace from the fender.
To install:
10. Position the nuts, retainers and brace on the fender.
11. Position the fender on the apron and loosely install the apron retaining bolts.
12. Loosely install the bolt from inside the cab attaching the rear end of the fender to the cowl.
13. Loosely install the bolt attaching the rear lower end of the fender to the lower corner of the cab.
14. Loosely install the bolt attaching the brace to the radiator support assembly.
15. Loosely install the 4 bolts along the fender inner body attaching the fender.
16. Adjust the position of the fender and tighten all mounting bolts.
17. Install the grille.
18. Install the apron screws around the wheel opening.
Exploded view of the Explorer/Mountaineer front fender−1993−99 Ranger is similar
REMOVAL & INSTALLATION
HOW TO USE THIS BOOK
Click to enlarge
1095