Ford Ranger Maintaince And Repair Manual page 976

Hide thumbs Also See for Ranger:

Table of Contents

Pull the out from behind the caliper. Repeat the procedure for the lower pin

Remove the caliper from the rotor.

Remove the outer pad. Remove the anti−rattle clips and remove the inner pad.

Place the inner pads friction material against the caliper piston and assemble the C−clamp to the

caliper again. Tighten the clamp until the caliper piston is fully seated into its bore.

REMOVAL & INSTALLATION

HOW TO USE THIS BOOK

Slide the caliper assembly off of the rotor

Troubleshooting

Mountaineer Explorer