Ford Ranger Maintaince And Repair Manual page 922

2. Remove the nuts, bolts and washers and disconnect the stabilizer bar from the links.
3. Remove the U−bolts and nuts from the mounting bracket and retainers. Remove the mounting
brackets, retainers and stabilizer bars.
To install:
4. Position the U−bolts and mounting brackets on the axle with the brackets having the UPmarking in
the proper position.
5. Install the stabilizer bar and retainers on the mounting brackets with the retainers having the
UPmarking in the proper position.
6. Connect the stabilizer bar to the rear links. Install the nuts, bolts, and washers and tighten.
7. Tighten the mounting bracket U−bolt nuts to 30−42 ft. lbs.
Chilton® Automotive Information Systems. © 2004 Thomson Delmar Learning.
938
HOW TO USE THIS BOOK
REMOVAL & INSTALLATION