Ford Ranger Maintaince And Repair Manual page 683

• Speed sensor
• Stoplamp and deactivator switches
The throttle actuator/control unit is mounted in the engine compartment and is connected to the throttle
linkage with an actuator cable. The control unit regulates the throttle actuator to keep the requested speed.
When the brake pedal is depressed, an electrical signal from the stoplamp and deactivator switches return the
system to stand−by mode. This system operates independently of engine vacuum, therefore no vacuum lines
are required.
Electronic cruise control system components−2.3L Ranger shown, others similar
Chilton® Automotive Information Systems. © 2004 Thomson Delmar Learning.
686
HOW TO USE THIS BOOK
Click to enlarge
Electronic Systems