8.
Remove the relay mounting bolts and remove the relay.
To install:
9.
Install the relay and mounting bolts. Tighten the mounting bolts until snug.
10.
Attach all wiring to the relay.
11.
If equipped, install the power distribution box cover.
12.
Connect the positive (+) cable to the battery.
13.
Connect the negative (−) cable to the battery.
Chilton® Automotive Information Systems. © 2004 Thomson Delmar Learning.
RELAY REPLACEMENT
HOW TO USE THIS BOOK
Remove the relay−to−fender apron attaching screws ...
... then remove the relay from the fender
235