Ford Ranger Maintaince And Repair Manual page 969

Bleed the caliper until you can see clean, air bubble free brake fluid moving through the tube
4. Open the bleeder screw valve
5. Have an assistant slowly depress the brake pedal. Close the bleeder screw valve and tell your assistant
to allow the brake pedal to return slowly. Continue this pumping action to force any air out of the
system. When bubbles cease to appear at the end of the bleeder hose, close the bleeder valve and
remove the hose.
6. Check the master cylinder fluid level and add fluid accordingly. Do this after bleeding each wheel.
7. Repeat the bleeding operation at the remaining 3 wheels, ending with the one closet to the master
cylinder. Fill the master cylinder reservoir.
Chilton® Automotive Information Systems. © 2004 Thomson Delmar Learning.
Bleeding The Brakes
HOW TO USE THIS BOOK
1 3
/ − / turn.
2 4
987