Ford Ranger Maintaince And Repair Manual page 314

Hide thumbs Also See for Ranger:

Table of Contents

If removing the left side exhaust manifold remove the oil level indicator tube retaining nut, rotate the

dipstick assembly out of the way. Also, if equipped, loosen the EGR tube flare nut at the valve and

remove the tube bolt at the manifold.

Exploded view of both left and right−hand exhaust manifolds on the 3.0L engine

Remove the manifold to exhaust pipe attaching nuts, then separate the exhaust pipe from the

Remove the exhaust manifold attaching bolts and the manifold.

Clean all gasket mating surfaces.

Lightly oil all bolt and stud threads before installation. If a new manifold is being installed, the

oxygen sensor will have to be transferred to the new part.

REMOVAL & INSTALLATION

HOW TO USE THIS BOOK

Click to enlarge

Troubleshooting

Mountaineer Explorer