Ford Ranger Maintaince And Repair Manual page 1097

7. Remove the rear corner trim panels.
8. Remove the dome lamp lens and lamp assembly.
9. Carefully remove the headliner from the truck.
To install:
10. If replacing the headliner, preshape the replacement one along the score marks to about the same
shape as the original.
11. Install the headliner to the roof of the truck.
12. Install the dome lamp assembly.
13. Install the rear corner trim panels and related items.
14. Install the lower back window garnish molding.
15. Install the coat hooks.
16. Install the front pillar moldings.
17. Install the upper windshield garnish molding.
18. Install the assist handles and sun visors.
Explorer/Mountaineer
1. Remove both sun visors and visor arm clips.
2. Remove the assist handles and coat hooks.
3. Remove the front pillar inside moldings
4. Remove the push pin at the roof centerline.
5. On 4−door models, remove the "B" pillar upper moldings.
6. Remove the top seat belt anchor cover and the anchor itself.
7. Remove the body side trim panels.
8. Remove the dome lamp and cargo lamp assemblies.
9. Remove the push pin retainers above the front doors, at the rear edges and at mid−vehicle.
If the original headliner is being reinstalled, install "U" channel reinforcements along the outboard
edges; these will prevent damage to the headliner. These pieces are sometimes used in shipping
containers.
10. Carefully remove the headliner from the truck.
To install:
1120
HOW TO USE THIS BOOK
Headliner installation−Explorer
Click to enlarge
REMOVAL & INSTALLATION