Ford Ranger Maintaince And Repair Manual page 724

Pull the lens assembly out from the vehicle body to access the bulb sockets
Grasp the bulb socket then twist and pull it out of the lens assembly
3. Remove the lamp sockets from the lens housing by twisting it, then pulling outward.
4. Remove the bulb from the socket by pulling it straight outward.
To install:
5. Install the bulb into the lamp socket.
6. Install the lamp socket to the lens and twist it to lock it in position.
7. Position the lens assembly to the body. On Explorer/Mountaineer models, ensure that the barbed
retainers are aligned with their mounting clips, and press the assembly until fully seated.
8. Install the lens assembly retaining screws (four screws used on the Ranger and 2 on the
Explorer/Mountaineer).
9. Check the operation of the lights.
High Mount Brake Light
730
HOW TO USE THIS BOOK
Remove the bulb from the socket by pulling it straight out
REMOVAL & INSTALLATION